DAMS 6 Rows Dough Cut and Weigh Machine DAKY-11
| TECHNICAL SPECIFICATIONS | |||
|
MACHINE WIDTH |
1480 mm |
VOLTAGE |
380 V |
|
MACHINE LENGTH |
2220 mm |
CURRENT |
25 Amper |
|
MACHINE HEIGHT |
1840 mm |
FREQUENCY |
50 Hertz |
|
MACHINE WEIGHT |
1700kg |
MAX. POWER |
5 kW |
|
CAPACITY (Average) |
11,000 pcs / h |
AVERAGE POWER |
4 kW |
GENERAL SPECIFICATIONS
The settings are made easily from the PLC-controlled touch screen.
Mechanical settings are simple to use and easy to learn.
Information on usage can be stored in memory and used continuously.
Daily cleaning is easy.
It is easy to disassemble, install and replace belts and running parts.
The speeds of all belts can be adjusted to the desired level.
Electrical and electronic faults that may occur are displayed on the PLC screen with pic and text.
In case of malfunction, remote access can be performed with PLC program (Optional)
CUTTING SECTION
|
Piston diameter |
Ø45 mm |
Ø48 mm |
Ø 50 mm |
Ø 55 mm |
Ø 60 mm |
Ø 65 mm |
|
Dividing range |
25-90 gr |
30-115 gr |
40–140gr |
50–160gr |
60–180gr |
70–220gr |
Various external drums are used to round off the dough in these ranges. Changing the external drums is easy, within a few minutes.
|
Drum No |
Grammage Range |
|
№ 0 / Special1 |
25-40gr |
|
№ 0 / Special |
30-50gr |
|
№ 0 |
40-55gr |
|
№ 1 |
50-75gr |
|
№ 2 |
70-115gr |
|
№ 3 |
115-160gr |
|
№ 4 |
160-220 gr |
Different outer drums are used for dough cutting in these weight ranges.
Average roll bread dough cutting and rounding capacity is 11.000 in 1 hour.
Maximum11,000 pieces of hamburgers and pastry dough per hour, the average of 7,000 pieces of bagel and sandwich dough.
Since very little flour is used in the dough section, it provides a clean working environment.
The amount of flour given to the cut dough can be adjusted.
The lubrication system is automatically adjusted during the dough cutting process.
Unlike other machines, it does not wear dough due to non-pressurized cutting.
Note Since there are pneumatic pistons on the machine, air of minimum 4 bar pressure is required for the operation of the machine. 5 * 2.5 multiple cables must be use for electricity. In order to prevent damage to the automation products used in the machine, a suitable regulator is recommended to prevent voltage fluctuations in electricity.
DAMS
All around the world
Offers only perfection
Do you need help?
Write to us via Whatsapp
